Technical data

System Networking 3-218
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
To answer the Call Offer:
1. Press the flashing CO line button while receiving a muted ring.
OR
2. The muted ring is changed to a normal CO ring the current call is disconnected; the
offered call then can be answered.
ADMIN PROGRAMMING
Voice Network
Network Basic Attribute (PGM 320) … see details on page A-145
PGM 320 BTN RANGE DEFAULT
NET ENABLE -- Enable Networking function. 1 0:Off
1:On
Off
NET CNIP ENABLE -- The name of the calling station is sent to the
called System between MBX IP systems. CNIP is displayed at the
called party Stations display based on the programming.
2 0:Off
1:On
On
NET CONP ENABLE -- Reserved for future usage. 3 0:Off
1:On
Off
NET SIGNAL METHOD -- Select the information element type for
QSIG supplementary service message.
4 0:UUS
1:FAC
UUS
NET CC RETAIN -- If this value is set to ON, the signaling of call
completion retain mode is executed. Used for networking
supplementary signaling type of the call completion.
5 0:Off
1:On
Off
BLF USAGE -- Used to set Networking BLF service. 6 0:Off
1:On
Off
TCP PORT FOR BLF -- TCP Port for sending BLF message to BLF
Manager.
7 9000-9999 9000
UDP PORT FOR BLF -- UDP Port for sending BLF message to BLF
Manager.
8 9000-9999 9001
DURATION OF BLF STS -- Duration for sending the BLF status
message to the BLF Server.
9 01-99 10
BLF MANAGER IP -- IP Address of BLF Server used only when 0
MBX IP is configured with other systems for Voce Networking
(Reserved).
10 - 0.0.0.0
Release 1.0
November 2010