Technical data

System Networking 3-213
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Call Completion
There are two kinds of Call Completion:
Completion of Calls to Busy Subscribers (CCBS) – After calling a User on another
System using basic call and encountering a busy tone, a Station-user can be notified
when the busy destination of another system becomes idle. If the user wants to make
a call to the destination when that notification is received, the call can be reinitiated to
the destination of the other system again.
Completion of Calls on No Reply (CCNR) – After calling a User in another System
using basic call and encountering No Reply (No Answer), the caller can set to be
notified when the destination becomes idle again. If the caller wants to make a call to
the destination when notification is received, the call can be reinitiated to the
destination on the other System again.
CONDITIONS
A stand-alone IP Phone that supports H.450 can activate Call Completion.
A station can leave or have only one callback message, and a new request will be left
as a message wait indication on the busy Station.
AND DIGIT -- AND (Automatic Network Dialing) Digit 4 10 digits -
DIGIT REPEAT -- Determine if AND digit is included in the SETUP
message or not.
50:Off
1:On
Off
DIGIT SENDING -- Select digit sending mode (Overlap or Enblock) 6 0:Overlap
1:Enblock
Overlap
VOIP CPN INFO -- 1: 001 VOIP CPN INFO 1
2: 001 VOIP CPN INFO 2
3: 001 VOIP CPN INFO 3
4: 001 VOIP CPN INFO 4
7- -
BLF SYSTEM IP -- IP Address of BLF Server used only when MBX
IP is configured with other systems for Voice Networking
8 - 0.0.0.0
BLF SYSTEM PORT -- UDP port for sending BLF message to BLF
Manager.
9 - 9500
FIREWALL ROUTING -- Select IP address (Firewall IP address or
Non-firewall IP address). If the destination system is in same VPN
then Non-firewall IP address should be sent. Otherwise the firewall IP
address should be sent. ON: Send firewall IP address
OFF: Send Non-firewall (Internal) IP address
10 0:Off
1:On
On
PGM 321 BTN RANGE DEFAULT
Release 1.0
November 2010