Technical data

System Networking 3-211
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Identification Service
When a user makes a Net Call, the System provides the name registered at the Station to the
Called Party between Systems.
OPERATION
If set, CNIP operation is automatic.
ADMIN PROGRAMMING
Numbering Plan
System Numbering Plan (PGM 111) … see details on page A-17
AND DIGIT -- AND (Automatic Network Dialing) Digit 4 10 digits -
DIGIT REPEAT -- Determine if AND digit is included in the SETUP
message or not.
50:Off
1:On
Off
DIGIT SENDING -- Select digit sending mode (Overlap or Enblock) 6 0:Overlap
1:Enblock
Overlap
VOIP CPN INFO -- 1: 001 VOIP CPN INFO 1
2: 001 VOIP CPN INFO 2
3: 001 VOIP CPN INFO 3
4: 001 VOIP CPN INFO 4
7- -
BLF SYSTEM IP -- IP Address of BLF Server used only when MBX
IP is configured with other systems for Voice Networking
8 - 0.0.0.0
BLF SYSTEM PORT -- UDP port for sending BLF message to BLF
Manager.
9 - 9500
FIREWALL ROUTING -- Select IP address (Firewall IP address or
Non-firewall IP address). If the destination system is in same VPN
then Non-firewall IP address should be sent. Otherwise the firewall IP
address should be sent. ON: Send firewall IP address
OFF: Send Non-firewall (Internal) IP address
10 0:Off
1:On
On
PGM 111 BTN RANGE REMARK
PREFIX CODE --
leading preceding digits of some
numbering plan code.
1 1-8 digits Prefix code length + more
digit can be 8 at max.
MORE DIGITS -- number of digits following the
Prefix code.
2 (0-4)
PGM 321 BTN RANGE DEFAULT
Release 1.0
November 2010