Technical data

System Networking 3-208
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
OPERATION
To perform a Screened Transfer to another Station on a different Networked System:
1. Press the [TRANS] button at a Station during a CO Line conversation; the CO line is
placed on Exclusive Hold.
2. Dial the destination Station number on another System to transfer the call; the Station
on the other System receives a ring signal.
3. Announce the call when the call is answered; the CO Call is held in Exclusive Hold
while the Station communicates with the destination Station.
4. Hang-up to complete the transfer.
To perform an Unscreened Transfer to another Station on a different Networked Station:
1. Press the [TRANS] button at a Station during a CO Line conversation; the CO line is
placed on Exclusive Hold.
2. Dial the destination Station number on another System to transfer the call; the Station
on the other System receives a ring signal.
3. Hang-up to complete the transfer.
ADMIN PROGRAMMING
Numbering Plan
System Numbering Plan (PGM 111) … see details on page A-17
CO Line Data
CO COS (PGM 177) … see details on page A-63
PGM 111 BTN RANGE REMARK
PREFIX CODE --
leading preceding digits of some
numbering plan code.
1 1-8 digits Prefix code length + more
digit can be 8 at max.
MORE DIGITS --
number of digits following the
Prefix code.
2 (0-4)
PGM 177 BTN RANGE DEFAULT
DAY COS -- CO COS in Day mode. 1 00-15 0
DAY COS -- CO COS in Night mode. 2 00-15 0
DAY COS -- CO COS in Timed mode. 3 00-15 0
Release 1.0
November 2010