Technical data

System Networking 3-205
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
CO Line Attribute (PGM 161) … see details on page A-48
Station
CO/IP Group Access (PGM 150) … see details on page A-45
Voice Network
Network Basic Attribute (PGM 320) … see details on page A-145
PGM 161 BTN RANGE DEFAULT
CO SERVICE MODE -- Determines if SIP/PRI, H.323/BRI
or Qsig is selected for each VOIP(or ISDN) lines.
1 1: SIP/PRI
2: H.323
3: Qsig
4: T1 PRI
5: T1 Qsig
SIP/PRI
DROP TYPE -- LCO line drop type. 2 0:Loop
1:Polarity Reverse
Loop
FLASH TYPE -- LCO line Flash type. 3 0:Loop
1:Ground
Loop
FLASH TMR -- CO Flash Timer. 4 001-300 050
OPEN LOOP TMR -- Open Loop Timer. 5 00-20
(100ms base)
00
LINE LENGTH -- LCO line length. 6 0: 0km
1: 3km
2: 5km
3: 7km
0km
ZONE NO -- Zone number of CO lines. 7 1-9 1
PROMPT LANGUAGE -- VMIB Prompt Index. 8 1-3 1
GAIN TABLE IDX -- Determines Gain Table for CO line. 9 1-3 1
PGM 320 BTN RANGE DEFAULT
NET ENABLE -- Enable Networking function. 1 0:Off
1:On
Off
NET CNIP ENABLE -- The name of the calling station is sent to the
called System between MBX IP systems. CNIP is displayed at the
called party Stations display based on the programming.
2 0:Off
1:On
On
Release 1.0
November 2010