Technical data

System Networking 3-200
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
ADMIN PROGRAMMING
Numbering Plan
System Numbering Plan (PGM 111) … see details on page A-17
Voice Network
Voice Network (PGM 320) … see details on page A-145
PGM 111 BTN RANGE REMARK
PREFIX CODE -- leading preceding digits of some
numbering plan code.
1 1-8 digits Prefix code length + more
digit can be 8 at max.
MORE DIGITS -- number of digits following the
Prefix code.
2 (0-4)
PGM 320 BTN RANGE DEFAULT
NET ENABLE -- Enable Networking function. 1 0: Off
1: On
Off
NET CNIP ENABLE -- The name of the calling station is sent to the
called System between MBX IP systems. CNIP is displayed at the
called party Stations display based on the programming.
20: Off
1: On
On
NET CONP ENABLE -- Reserved for future usage. 3 0: Off
1: On
Off
NET SIGNAL METHOD -- Select the information element type for
QSIG supplementary service message.
4 0: UUS
1: FAC
UUS
NET CC RETAIN -- If this value is set to ON, the signaling of call
completion retain mode is executed. Used for networking
supplementary signaling type of the call completion.
50: Off
1: On
Off
BLF USAGE -- Used to set Networking BLF service. 6 0: Off
1: On
Off
TCP PORT FOR BLF -- TCP Port for sending BLF message to BLF
Manager.
7 9000-9999 9000
UDP PORT FOR BLF -- UDP Port for sending BLF message to BLF
Manager.
8 9000-9999 9001
DURATION OF BLF STS -- Duration for sending the BLF status
message to the BLF Server.
9 01-99 10
BLF MANAGER IP -- IP Address of BLF Server used only when MBX
IP is configured with other systems for Voce Networking (Reserved).
10 - 0.0.0.0
Release 1.0
November 2010