Technical data

Station Message Detail Recording (SMDR) 3-187
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
To delete All SMDR records (all of SMDR):
1. Press the [PGM] button.
2. Dial 016 {SMDR delete code}.
3. Press the [SAVE] button.
ADMIN PROGRAMMING
System
SMDR Attributes (PGM 232) … see details on page A-94
PGM 232 BTN RANGE DEFAULT
SMDR SERVICE -- SMDR Service Option.
On-Line / Off-Line SMDR / SMDR-Interface /
Email Service .can be enabled
1 0: Not Use
1: On-Line
2: Off-Line
3: On-Line/Off-Line
4: SMDR-Interface
5: SMDR E-Mail
6: Off-Line & E-Mail
7: On/Off-Line & E-Mail
8: Interface & E-Mail
0:Not Use
OUTGOING REPORT -- Outgoing Call Report
Option for SMDR Service.
If this option is set, outgoing call will be included
at SMDR data
20:Off
1:On
0:Off
INCOMING REPORT -- Incoming Call Report
Option for SMDR Service.
If this option is set, incoming call will be included
at SMDR data
30:Off
1:On
0:Off
ICM REPORT -- Internal Call Report Option for
SMDR Service.If this option is set, internal call
will be included at SMDR data
40:Off
1:On
0:Off
LOST CALL REPORT -- Outgoing or Incoming
Lost Call Report Option for SMDR Service. If this
option is set, CO lost call will be included at
SMDR data
50:Off
1:On
0:Off
RECORD TYPE -- If set to on, LD calls are
identified by the LONG DIST CALL DGT Counter;
the system can record all outgoing calls or only
long distance calls.
6 0:All Call
1:LD
0:All Call
Release 1.0
November 2010