Technical data

System Groups 3-180
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
ADMIN PROGRAMMING
Station Group
PTT Group (PGM 208) Numbering Plan … see details on page A-75
PTT Group Log In/Out (PGM 113) … see details on page A-19
Command Conference Group
A Station or external telephone number can be assigned as a member of a Command
Conference Group.
Stations and external contacts (up to 12 members) can be arranged in groups so that a user
may create a conference with all members of the group through a single call. Additionally, the
user can make paging calls with same group.
There are 2 kinds of Command Conference Groups:
• Command One Way: A user can make announcements (paging) to members of the
Command Group.
• Command Conference: A user can make conference calls with members of the
Command Group.
On-Hook Service – An internal user can receive a command call while the Station is On-Hook.
When an internal user receives a command group call and the call goes unanswered, the
System will make a recall to the user station.
One- or Both-Way Busy – When an internal user receives command group call while in busy
status, the command group call is ignored, and can be queued. When an internal user receives
a command group call while in busy status, the current call will be disconnected and the
command group call automatically is connected.
OPERATION
To initiate a Command Group (One Way):
1. Dial the {One Way Command Group Call} feature code.
2. Enter the Command Group number.
PGM 208 BTN RANGE DEFAULT
PTT MEMBER ASG -- this entry assigns stations as members of a
PTT group.
1- -
BTN FEATURE (PGM 113) REMARK
46 PTT Group Access 524 + PTT Group # ( 0-9) + * (Log out)
Release 1.0
November 2010