Technical data

System Groups 3-179
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Group Pick-Up Code (PGM 113) … see details on page A-19
RELATED FEATURES
Group Call Pick-Up … see page 3-28
Push To Talk (PTT) Group
Each Phone can be assigned as a member of one or more of the System Push-To-Talk (PTT)
groups. The Phone user may log-in or log-out of any one, or all PTT groups to which it is
assigned. Once logged in, the user may place or receive one-way page announcements
to/from other users who are logged in to the same PTT group. Additionally, each user can log
in or log out PTT group using the {PTT Group Log-In/Out Feature Code}.
CONDITIONS
- Only a SADN can be assigned as a member of Paging Group (PTT Group).
- SIP Stations cannot be assigned to Paging Groups.
- PTT Group 0 is a specific PTT Group, so if a member of the PTT group 0 tries to make
a PTT announcement, all of the members in all of groups will receive the
announcement. Additionally, each group member can make PTT calls, then all
members of Group 0 will receive the announcement.
OPERATION
Log-in PTT Group with Feature Code:
1. Dial the {PTT Group Log-In/Out Feature Code}; the PTT Group status and registration
will be displayed.
2. Dial a PTT Group Number.
Log-out PTT Group with Feature Code:
1. Dial {PTT Group Log-In/Out Feature Code}; the PTT Group status and registration will
be displayed.
2. Dial
*
(Log-Out Code).
To make a PTT Group Call:
1. Press the programmed {PTT} button.
2. When finished, press the {PTT} button to end the call.
BTN FEATURE (PGM 113) REMARK
33 Group Call Pickup 564
Release 1.0
November 2010