Technical data

System Groups 3-169
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
CCR Table (PGM 260) … see details on page A-115
Forward Destination, Overflow Service
This can be assigned as Station/Hunt Group/Telephone Number, covering Station Group Call
according to the Forward type of the Station Group. There are 4 kinds of Forward type in an
Station Group:
- Unconditional
- Queuing Overflow
- Queuing Timeout
- Queuing Overflow or Queuing Timeout
The Overflow Destination can be programmed as Station/Station Group/External number/NET
Destination.
OPERATION
To use the Unconditional Forward Overflow Destination:
1. Dial the {Station Group Number}.
2. The Call is Routed to the Forward Destination.
To use the Queuing Overflow Forward Destination:
1. Dial the {Station Group Number}.
2. The Call is Queued when all Member Stations are in Busy mode.
NOTE: The Call will be Routed to the Forward Destination when max. queue has been
Overflowed.
To use Queuing Timeout Forward Destination:
3. Dial the {Station Group Number}.
4. The call is Queued when all Member Stations are in Busy mode.
NOTE: Calls will be Routed to the Forward Destination when Queuing Time has
expired.
PGM 260 BTN RANGE DEFAULT
CCR TABLE -- The destination of CCR input digit; the destination
can be a Station number, Station group number or Feature code.
NOTE: For Feature codes, refer to the Numbering Plan for the
applicable codes.
1-12 Max 8 digits -
Release 1.0
November 2010