Technical data

Station Call Coverage 3-149
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Station Call Coverage
The DN button at a Station can be set for incoming calls only by disabling outgoing calls. If the
MADN-type DN button has a delayed ring option, the button will operate as a call coverage
button. This feature must be programmed by the Administrator; individual users cannot set this
feature.
OPERATION
If Programmed, Station Call Coverage is automatic.
ADMIN PROGRAMMING
Station
Station Number Type (PGM 130 - FLEX 1) … see details on page A-32
Flex Button Assign (PGM 126) … see details on page A-30
DN Flex Button Ring Option (PGM 126 - FLEX 2) … see details on page A-31
DN Flex Button Access (PGM 126 - FLEX 3) … see details on page A-31
System Groups
Stations can be grouped for call routing, dialing, call pick-up, or other various purposes. The
following groups can be defined:
Station Group: Terminal / Circular / Ring / Longest Idle / VM
Pilot Hunt Group
Pick-Up Group
PTT Group
Command Conference Group
Interphone Group
Paging Group
Release 1.0
November 2010