Technical data

Speed Dial 3-145

Chapter 3: System Features

MBX IP Description / Operations & Programming Guide

To program a Station Speed Dial number:

1. Dial {SLT Programming code}.

2. Dial {SLT Speed Dial access code}.

3. Dial the Speed Dial bin number.

4. Dial the {CO/IP Group Access code}.

5. Dial the number to be stored.

6. Press for hook-switch.

7. If desired, enter a name (refer to Alphanumeric Entry Chart on page B-105).

8. Press for hook-switch.

ADMIN PROGRAMMING

Station Data

Speed Access (PGM 134-BTN 1) … see details on page A-36

Table Data

System Speed Dial Table (PGM 257) … see details on page A-113

PGM 134 BTN RANGE DEFAULT

SPEED ACCESS -- gives station speed dial bins access authority. 1 0:Disable

1:Enable

Enable

PGM 257 BTN RANGE DEFAULT

SYS SPD DIAL -- The System Speed Dial Digits. 1 Max 32 digits -

SYS SPD NAME -- The System Speed Dial Name. 2 Max 16 characters -

TOLL FREE -- Assignment to apply toll free. 3 0:Off

1:On

0:Off

TENANT NO -- The tenant number to be applied to the System

Speed Access.

4 1-9 (MBX IP-300)

1-5 (MBX IP-100)

Release 1.0

November 2010