Technical data

Speed Dial 3-142
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Speed Dial
Speed Dial Pause Insertion
A pause dialing command may be inserted in a Station or System Speed Dial number. When
encountered, the System will stop dialing the Speed Dial number for the assigned "pause"
duration. Multiple pauses ([HOLD] button depressions) may be inserted into a Speed Dial
number.
CONDITIONS
- Timed pause is used only with analog CO lines.
OPERATION
System
When set, Pause operation is automatic.
ADMIN PROGRAMMING
Station Data
Speed Access (PGM 134, FLEX 1) … see details on page A-35
Table Data
System Speed Dial Table (PGM 257) … see details on page A-113
PGM 134 BTN RANGE DEFAULT
SPEED ACCESS -- gives station speed dial bins access authority. 1 0: Disable
1: Enable
Enable
PGM 257 BTN RANGE DEFAULT
SYS SPD DIAL -- The System Speed Dial Digits. 1 Max 32 digits -
SYS SPD NAME -- The System Speed Dial Name. 2 Max 16 characters -
TOLL FREE -- Assignment to apply toll free. 3 0: Off
1: On
0: Off
TENANT NO -- The tenant number to be applied to the System
Speed Access.
4 1-9 (MBX IP-300)
1-5 (MBX IP-100)
1
Release 1.0
November 2010