Technical data

Remote Device Zone Management 3-139
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Remote Device Zone Management
Remote devices, in particular those not reachable by the System, are managed by grouping
devices by various characteristics in a Zone. Placing devices into Zones simplifies
management allowing definition of common characteristics to the devices within the zone.
Zone attributes include:
• Nation Code
• Language
•RTP Relay
• RTP Relay group
CONDITIONS
- It is recommended to assign CO/IP lines and Stations of a Tenant group in the same
Device Zone.
- Wake-up time is based on the time displayed in the Station LCD.
OPERATION
When set, Zone operation is automatic.
ADMIN PROGRAMMING
Zone Data
Zone Attributes … use Web Admin (PGM 395)
Zone RTP Relay Group … use Web Admin (PGM 396)
Inter-Zone Attributes … use Web Admin (PGM 397)
Station Zone Attributes … use Web Admin (PGM 399)
Remote Services, Managed Net
IP Phones, DTIM and SLTM can run on a System located on a different LAN segment or WAN
without the need for additional equipment.
The System can be assigned with the IP address of the default gateway (router) running the
remote device. The system will register the device through the router. Using this configuration,
the device can establish a connection with the system and then establish peer-to-peer
communication with other devices as needed.
Release 1.0
November 2010