Technical data

Pre-defined & Custom Text Display Messages 3-131
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
To define the User Custom Text Message (
*
):
1. Press the [PGM] button.
2. Dial 42 {Custom Message program code}.
3. Enter the Message contents (up to 16 characters, refer to Alphanumeric Entry Chart
on page B-105).
4. Press the [SAVE] button; confirmation tone is heard and the new User Custom Text
Display Message is stored.
NOTE: Alphanumeric characters may be entered using the following guides as shown in
the Quick Reference chapter on page B-105.
Single Line Phone
To activate a Display Message:
1. Lift the handset.
2. Dial {SLT Programming code}.
3. Dial 41 {Display Message code}.
4. Dial the Message number (0-9, or
*
for User's Custom Message).
5. Enter auxiliary input (hh:mm, mm:dd, etc. as needed).
6. Press the hook-switch; confirmation tone is heard.
To cancel an active Display Message:
1. Lift the handset.
2. Dial {SLT Feature Cancel code}.
To enter the User Custom Message (
*
):
1. Lift the handset.
2. Dial {SLT Programming code}.
3. Dial 41 {Display Message code}.
4. Enter the Message contents (up to 16 characters, refer to Alphanumeric Entry Chart
on page B-105).
5. Press the hook-switch, confirmation tone is received.
Release 1.0
November 2010