Technical data

Pre-defined & Custom Text Display Messages 3-130
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
CONDITIONS
- Alphanumeric characters are displayed as they are entered.
- Display Message is cancelled if the User activates DND or Call Forward.
- Custom Text Display Messages and Display Message status are stored in non-volatile
memory to protect against loss during power failure.
- Incoming Caller Station will display the message.
- SLTs are notified of an active Display Message with a stutter dial tone, while Digital
Phones will have a flashing [DND] button when there is an active Text Display
Message.
- Activating a Text Display Message does not affect normal operation of the station.
- Pre-defined Messages 01-04, and 06-08 permit the user to input auxiliary information
such as time, date or number, as applicable.
- The Attendant station can activate a Text Display Message for other stations, however
this feature is not available to an Attendant.
OPERATION
Digital Phone
To assign a Flex button for Display Messages:
PRESS [PGM] + {FLEX} + Button Feature Type(1) + {Preselected Message PGM Code} +
[SAVE]
To activate a Display Message that will be presented to incoming callers:
1. Press the [PGM] button.
2. Dial 41 {Display Message code}.
3. To scroll through the available messages, press [VOL UP]/[VOL DOWN] button.
4. Dial the Message number (0-9, or
*
for User’s Custom Message).
5. Enter auxiliary input (hh:mm, mm:dd, etc. as needed).
6. Press the [SAVE] button.
To cancel an active Display Message:
1. Press the flashing [DND] button.
OR
2. Press the [PGM] button.
3. Dial 41 {Display Message code}.
4. Press the # key.
5. Press the [SAVE] button.
Release 1.0
November 2010