Technical data

One Digit Service 3-127
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Tenant Data
Intercom Busy One-Digit Attributes (PGM 237 - FLEX 1) … see details on page A-103
Call Wait
Call Wait is used to notify a busy station that a call is waiting to be answered. The busy station
is notified of the waiting call by a Call Wait tone. For Digital Phone users, the [HOLD] button
LED will flash. The called station can respond by either:
• Answering the waiting call (which places the active call on Hold first),
• Activating One-Time DND
• Ignoring the Camp-On tone.
CONDITIONS
- The user may only Call Wait to a station in the busy mode; a user may not Call Wait at
a station in DND, conference, or receiving a Page, etc.
- A Call Wait tone is sent each time the calling user presses the programmed {Call Wait}
button.
OPERATION
Digital Phone
To activate a Call Wait while receiving Intercom busy tone:
Press the {Call Wait} button, called and calling stations will receive the Call Wait tone.
To answer a Call Wait after receiving the Call Wait indication:
Press the [HOLD] button; the first active call is placed on hold and the station is connected
with the Call Waiting station.
Digital Phone/Single Line Phone
To activate a Call Wait while receiving Intercom busy tone:
Press the {Call Wait} button, called and calling stations will receive the Call Wait tone.
PGM 237 BTN RANGE DEFAULT
INTERCOM BUSY ONE-DIGIT SERVICE -- determines if step call is
enabled or disabled.
1 0:Disable
1:Enable
Disable
Release 1.0
November 2010