Technical data

Mobile Extension 3-117
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
To register a mobile phone number:
1. Press the [PGM] button.
2. Dial 52 {Mobile Extension Registration code}.
3. Dial mobile phone index (1 or 2).
4. Dial the mobile phone number with CO access code.
5. Press the [SAVE] button.
To place a call from the mobile extension using the system:
1. Dial the DID number of the station, the system will check the CLI information, answer
the call and the user will receive intercom dial tone.
2. Place internal or external call as normal.
To Transfer a call from the mobile extension using the system:
1. Dial {Mobile Flash code}.
2. Dial the desired extension, the call is transferred and the mobile phone returns to idle.
NOTE: The mobile phone may reconnect by dialing the {Mobile Flash Code}.
System
Incoming DID calls are sent to active mobile phones automatically.
ADMIN PROGRAMMING
System Data
Mobile Attributes (PGM 236)
… see details on page A-102
Station Data
Mobile Extension Access (PGM 132 - FLEX 6)
… see details on page A-34
PGM 236 BTN RANGE DEFAULT
FLASH DIGIT -- The flash digit from mobile extension. 1 Max 2 digits *
INPUT TIMER -- The inter-digit timer of the mobile flash digit
(2 sec).
1 01-20 (seconds) 05
PGM 132 BTN RANGE DEFAULT
MOBILE EXT ACCESS -- enables mobile extension ability. 6 0: Disable
1: Enable
Enable
Release 1.0
November 2010