Technical data

Linked Station Pairs/Group 3-113
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Digit Conversion option (PGM 252) … see details on page A-109
LCR Time Table (PGM 255) … see details on page A-112
RELATED FEATURES
Digit Conversion … see page 3-73
CO/IP Access … see page 3-37
Station Flexible Buttons … see page 6-21
Linked Station Pairs/Group
One MADN can be assigned to 10 stations at max so 10 stations can make a linked group, not
only paired. If all of the stations set the DN to their Prime-DN, all of 10 stations act like the same
station. If one of the stations uses the number, other stations cannot use the same number. Only
different Sub-DN can be used at the same time.
CONDITIONS
- If a member of MADN presses the [DND] button while ringing, only the member
station's ringing is stopped.
PGM 252 BTN RANGE DEFAULT
DISPLAY CONV. DIGIT -- If it is set to ON, the station LCD is updated
to the dialed digits when alerting message is received from the PX
after dialing.
1 On/Off Off
PRINT CONV. DIGIT -- If it is set to ON, the dialed digits are printed
to the SMDR.
2 On/Off Off
PGM 255 BTN RANGE DEFAULT
DAY ZN -- For each day of the week, a Day Zone (1 to 3) is
assigned. The active Day Zone is the Zone assigned to the current
day of the week (Flex button 1-7).
1 FLEX 1-7
+ 1-3
Zone 1: All days
of the week
DAY ZONE 1 -- This entry defines the time zone of day zone 1
when Day Zone 1 is active.
2 00-24 00-24
DAY ZONE 2 -- This entry defines the time zone of day zone 2
when Day Zone 2 is active.
3 00-24 -
DAY ZONE 3 -- This entry defines the time zone of day zone 3
when Day Zone 3 is active.
4 00-24 -
Release 1.0
November 2010