Technical data

Least Cost Routing (LCR) 3-111
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Least Cost Routing (LCR)
The LCR feature is supported using digit-conversion; the rule can be set differently according
to the Day/Night/Timed mode or LCR Time. If digit conversion is enabled, the System will seize
the CO/IP line after digit-conversion is completed. Meanwhile, the Dummy Dial tone can be
provided if programmed.
CONDITIONS
- The digit conversion apply rule is applied to bin base of digit conversion table.
OPERATION
Digits are converted automatically based on the Digit Conversion table.
ADMIN PROGRAMMING
Table Data
Digit Conversion Table (PGM 251) … see details on page A-107
PGM 251 BTN RANGE DEFAULT
APPLY T-TYPE -- The Apply time type to be applied when the
dialed digit is dialed.
1 0:Unconditional
1:Follow DNT
2: Follow LCR
Unconditional
DIALED DIGITS -- The dialed digits. 2 Max 16 digits -
UNCOND CHANGED -- The CO Group Access Code and
digits to be sent to PX when the dialed digit is pressed if
Apply time type is 'unconditional'.
3 Max 16 digits -
DAY CHANGED -- The CO Group Access Code and digits to
be sent to PX in Day when the dialed digit is pressed if Apply
time type is 'FOLLOW DNT'.
4 Max 16 digits -
NIGHT CHANGED -- The CO Group Access Code and digits
to be sent to PX in Night when the dialed digit is pressed if
Apply time type is 'FOLLOW DNT'
5 Max 16 digits -
TIMED CHANGED -- The CO Group Access Code and digits
to be sent to PX in Timed when the dialed digit is pressed if
Apply time type is 'FOLLOW DNT'.
6 Max 16 digits -
D1/T1 CHANGED -- The CO Group Access Code and digits
to be sent to PX in 'Day 1/Time 1' when the dialed digit is
pressed if Apply time type is 'FOLLOW LCR'.
7 Max 16 digits -
Release 1.0
November 2010