Technical data

In-Room Indication 3-107
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Hot Desk Agent Number (PGM 131 - FLEX 8) … see details on page A-33
System Timer
Hot Desk Logout Timer (PGM 220 - FLEX 2) … see details on page A-85
RELATED FEATURES
Call Forward … see page 3-15
HARDWARE
Digital Phone
In-Room Indication
When an Executive is in the office, their Secretary can press the programmed LED In-Room
Indication button signaling other stations of the Executive's status.
CONDITIONS
- Set other Station's MADN Flex button Access Option to Disabled (Incoming only) to
make the secretary station the only station able to control the DN state.
OPERATION
To program In-Room Indication:
1. Using Admin. Programming, set a MADN-type DN number to be used as an In-Room
Indication button.
2. Enter {DND Status Change code} to register auto-dialing digits for the DN.
3. Assign a flex button for the DN at the Secretary station and to other Stations needing
to know the Executive's status.
PGM 131 BTN RANGE DEFAULT
HOTDESK AGENT NUMBER-- sets wake-up time. 8 0: Off
1: On
Off
PGM 220 BTN RANGE DEFAULT
HOT-DESK LOGOUT TMR -- Determines the amount of time the
attendant receives recall after which the system will disconnect the
call.
2 00-24 hrs 00
Release 1.0
November 2010