Technical data

Hold 3-104
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
ADMIN PROGRAMMING
Station Data
Automatic Hold Access (PGM 123 - FLEX 3) l … see page A-27
PGM 123 BTN RANGE DEFAULT
PRIME NUMBER BTN -- among My-DN and several Sub-DNs
which are assigned to station flex buttons, determines the
first-seized DN when the user initiates a call. If prime button is not
set of invalid, the system scans sequentially from flexible button 1
to flexible Button 48 and take the unused and valid flexible button
as prime button NOTE: DN buttons of associated DSS box cannot
be a prime number button.
1 01-48 01
ZONE NO -- this menu represents a station belonging to what zone. 2 1-9 1
AUTO HOLD -- enables Auto Hold for the station. With Auto Hold
enabled, the system will place an active external call on hold if the
user presses a CO/IP or DSS button.
3 0: Off
1: On
Off
ENBLOCK DIAL -- when On, the user-dialed digits are stored at the
Digital Phone until explicitly sent by the user. When sent, all dialed
digits are sent to the system in a block. Enblock mode is only
available to Digital Phones with soft keys.
4 0: Off
1: On
Off
ICM ANSWER MODE -- selects Handsfree, Privacy or Tone ring
ICM Signaling mode.
5 1: Handsfree
2: Tone
3: Privacy
Tone
DATA SECURITY -- disables override and camp-on tones to the
station to avoid occurring error when sending data.
6 0: Off
1: On
Off
PROGRESS INDICATOR -- if this value is set to ON, Progress
Indicator Information is included to Setup message (Origin is
non-ISDN).
7 0: Off
1: On
Off
FAX MODE -- if this value is set to ON, Bearer Capability
information with 3.1Khz is provided to PX.
8 0: Off
1: On
Off
DTMF WHEN REDIAL -- if this value is set to ON, DTMF tone is
heard to the station user while redial. (Reserved) .
9 0: Off
1: On
On
MUTE RING SERVICE -- if this value is set to MUTE RING, system
provides MUTE RING to user.
10 0: Mute Ring
1: No Ring
Mute Ring
AUTO IDLE SERVICE -- If this value is set to AUTO, system
provides Auto Idle service.
11 0: Auto
1: Manual
Auto
Release 1.0
November 2010