Technical data

Hold 3-103
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Table Data
CO Hold Tone Timer … see page A-142 use Web Admin (PGM 290 - FLEX 55)
RELATED FEATURES
Call Transfer … see page 3-30
CO/IP … see page 3-37
Automatic Hold
While on an active CO/IP call, the system will place the call on hold automatically. The station
can be programmed to support CO/IP to CO/IP Automatic Hold. In this case, pressing a CO/IP
button while on a CO/IP call will place the active call on hold and access the selected CO/IP
line.
CONDITIONS
- CO/IP lines placed on hold with Automatic Hold are placed in the assigned Hold
Timer.
- Hold Timer can be assigned by Tone time in the Tone Table.
- There is no limit on the number of calls that can be placed on hold using Automatic
Hold.
OPERATION
Digital
To use Automatic Hold:
Press {CO} OR {LOOP-KEY} button, while on an active Station or CO/IP call; the call is
placed on Hold.
NO ANSWER TONE -- If destination is set to Tone, the
Error / Busy tone is heard.
5- -
NO ANSWER PILOT HUNT GROUP -- The CO call is
routed to Pilot Hunt Group of the original destination.
6- -
NO ANSWER RING -- The call is routed to the same
destination again.
7- -
NO ANSWERThe CO call is routed to the transferred
station again.
Only possible for 'Transfer No Answer' case.
8- -
PGM 173 BTN RANGE DEFAULT
Release 1.0
November 2010