Technical data

Hold 3-100
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Speakerphone/Headset (PGM 121 - FLEX 2) … see page A-25
RELATED FEATURES
Speakerphone … see page 6-19
Paging … see page 4-16
Hold
The user can place a CO/IP line or Station on Hold during a phone conversation.
CONDITIONS
- After placing ca call on Hold, the station returns to an idle state and the user can make
another call.
- If the Station is in the off-hook state when making a call on hold, the dial tone is heard.
OPERATION
Digital Phone
To place an active CO Call on Hold:
Press the [HOLD] button.
To retrieve the Held CO Call:
Press the {CO} OR {LOOP-KEY} button associated with the held CO, and then the CO call
is connected again.
Single Line Phone
To place an active CO Call on Hold:
1. Press the Hook-switch during a conversation.
2. Dial {System Hold Code}; a confirmation tone is heard.
3. Place the handset.
PGM 121 BTN RANGE DEFAULT
HEADSET MODE -- selects Speakerphone mode, Headset mode or
Ear Mic Mode.
2 0:Speaker
1:Headset
2:E-MIC
Speaker
Release 1.0
November 2010