Technical data

Flexible Numbering Plan 3-96
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Flexible Numbering Plan
User access to System resources and features is accomplished using Feature codes or
Flexible buttons. The Administrator can select from one of seven different standard Numbering
Plans, and if desired, can assign codes for individual functions in the Flexible Numbering Plan.
The feature codes are defined in the System's Flexible Numbering Plan (refer to Appendix B).
CONDITIONS
- The System can support up to 8-digit numbering for Station numbers or Feature
codes.
- To assign a Numbering Plan code, it should be matched (type) with a Prefix
Numbering Plan consisting of a prefix and additional digits.
- The selected Prefix Numbering Plan cannot conflict (ex., if a prefix consists of 1 digit
and 4 additional digits, then there cannot be another prefix of 10 digits with 4
additional digits.
- The additional digits of a Prefix Numbering Plan cannot be more than 4.
- When a Prefix Numbering Plan consists of more than 4 digits, the preceding digits of
the prefix code are placed at more than 4 digits from end digit (called Master Prefix
Digits, can be up to 3 in the MBX IP-100 system and 5 in MBX IP-300 system).
- When a conflicting Prefix is identified, the existing non-conflicting Numbering Plan is
used until correctly updated.
- If Numbering Plan type 7 is selected, all numbering codes are deleted; the first user
should assign the Prefix Numbering plan. After configuring the prefix, the user can
assign Station Number, CO Group Access Code, Extra Numbering and Feature code
(for use when user wants to reconfigure all numbering codes).
OPERATION
System
The System implements Feature activation based on the selected Flexible Numbering
Plan.
ADMIN PROGRAMMING
Numbering Plan
Numbering Plan (PGM 110) … see details on page A-16
Release 1.0
November 2010