Technical data

External Auto Attendant/Voice Mail 3-95
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
VM Group Attribute Assignment (PGM 203) … see details on page A-72
System
Voice Mail Interface Select (PGM 223 - FLEX 3) … see details on page A-88
RELATED FEATURES
AA/VM Group … see page 3-86
In-band (DTMF) Signaling … see page 3-89
VMIB Integrated Auto Attd/Voice Mail … see page 3-254
HARDWARE
External AA/VM system
PGM 203 BTN RANGE DEFAULT
VM PUT MAIL INDEX -- for external analog Voice Mail groups, an index
to the Voice Mail Dial Table, which contains the "Put Mail" dial code.
11-9 1
VM GET MAIL INDEX -- for external analog Voice Mail groups, an index
to the Voice Mail Dial Table, which contains the "Get Mail" dial code.
21-9 2
VM BUSY INDEX -- for external analog Voice Mail groups, an index to
the Voice Mail Dial Table, which contains the "Busy" dial code.
31-9 3
VM NO ANSWER INDEX -- For external analog Voice Mail groups, an
index to the Voice Mail Dial Table, which contains the "No answer" dial
code.
41-9 4
VM DISCONNECT -- for external analog Voice Mail groups, an index to
the Voice Mail Dial Table, which contains the "Disconnect" dial code.
51-9 9
SMDI TYPE -- this entry defines SMDI Type. 6 0: Type 1
1: Type 2
Type 1
SMDI CLI INFO -- this entry defines SMDI CLI Information.
If this is enable, system sends SMDI with CLI.
70: Off
1: On
Off
PGM 223 BTN RANGE DEFAULT
VM SMDI ENABLE -- if it is set to "ON, system interfaces SMDI protocol
with external Voice Mail, If 'OFF', system interfaces In-band message
with external Voice Mail.
30: Off
1: On
0: Off
Release 1.0
November 2010