Technical data

Door Open 3-78
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Door Open
The hardware is equipped with a relay that activates an External Control Contact. The contact
can be assigned to one of several functions including a Door Open Contact; the contact is
connected to a door-lock release mechanism. When a Station receives the Door Bell signal,
the Station User may dial the Door Open code to activate the contact.
CONDITIONS
- One relay contact is available.
- The contacts are rated at 1 amp, 24 VDC.
OPERATION
Digital Phone
To assign a {DOOR OPEN} button:
[PGM] + {FLEX} + Button Feature Type (1) + {Door Open Feature Code} + [SAVE]
To activate the relay contact:
1. Lift handset or press [SPEAKER] button.
2. Dial the {Door Open code}.
3. Hang-up to return the phone to idle.
OR
1. Lift the handset or press [SPEAKER].
2. Press the programmed {DOOR OPEN} button.
3. Hang-up to return the phone to idle.
ADMIN PROGRAMMING
Station Data
Door Open Access (PGM 121 - FLEX 13) … see details on page A-25
PGM 121 BTN RANGE DEFAULT
DOOR OPEN -- enable to use door open feature. 13 0:Disable
1:Enable
Disable
Release 1.0
November 2010