Technical data

Do Not Disturb (DND) 3-76
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Do Not Disturb (DND)
A Station enabled with the Do Not Disturb (DND) feature, can be placed in DND to block
incoming ringing for CO/IP and Intercom calls, transfers, and paging announcements.
CONDITIONS
- A station will receive an error tone if unable to access DND.
- If DND is enabled, pressing the [DND] button while ringing will activate One-Time
DND.
- An Attendant may cancel DND for Stations on the System.
- DND service is available for use by Attendants.
- Recalls for CO/IP calls will override the DND feature.
- A station in DND is out-of-service for all incoming calls including Station Group calls.
- A station in DND is ignores calls forwarded to the station; if the last station in a Call
Forward chain is in DND, the call will ring at the previous Station in the chain.
- When calling a Station in DND, the Digital Phone display will indicate the DND status.
LCR TIME INDEX -- LCR Time Table Index. 17 1-9, none none
NAME -- When DID destination starts to ring, the name is
displayed on the ringing station's LCD.
18 Max 16 digits -
APPLY OPTION -- The Apply Option can be applied
according to the caller.
19 0:All
1:Station
2:CO Line
3:Diable
0:All
PGM 252 BTN RANGE DEFAULT
DISPLAY CONV. DIGIT -- If it is set to ON, the station LCD is updated
to the dialed digits when alerting message is received from the PX
after dialing.
1 On/Off Off
PRINT CONV. DIGIT -- If it is set to ON, the dialed digits are printed
to the SMDR.
2 On/Off Off
PGM 251 BTN RANGE DEFAULT
Release 1.0
November 2010