Technical data

Digit Conversion 3-74
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
- The following features have higher priority over digit conversion:
AND (Automatic Network Dialing)
Automatic CO Seize
- In Call log, dialed digit is displayed on the station's LCD.
- The Digit Conversion Table can be applied by Apply Option (All/Station/CO
Line/Disable)
OPERATION
Digit Conversion is applied automatically according to ADM programming.
ADMIN PROGRAMMING
Station Data
Digit Conversion Table Index (PGM 131 - FLEX 3) page A-107
CO Data
Digit Conversion Table Index (PGM 160 - FLEX 6) page A-107
Table Data
Digit Conversion Table (PGM 251, PGM 252) page A-107
PGM 131 BTN RANGE DEFAULT
DIGIT CONVERSION TBL -- specify Digit conversion table for
station.
31-9 1
PGM 160 BTN RANGE DEFAULT
DGT CONVERT TBL -- Set Digit Conversion Table index. 6 1-9 2
PGM 251 BTN RANGE DEFAULT
APPLY T-TYPE -- The Apply time type to be applied when the
dialed digit is dialed.
1 0:Unconditional
1:Follow DNT
2: Follow LCR
Unconditional
DIALED DIGITS -- The dialed digits. 2 Max 16 digits -
UNCOND CHANGED -- The CO Group Access Code and
digits to be sent to PX when the dialed digit is pressed if
Apply time type is 'unconditional'.
3 Max 16 digits -
Release 1.0
November 2010