User guide

Release 1.0 SUMMIT IP Station User Guide April 2014
Appendix B
IP PHONE SETUP
Using the Display Menu
The Liquid Crystal Display (LCD) of the IP-8012 has three lines, and the IP-8024 has four
lines of 24 characters each. The LCD is used to convey information to you. It provides the
date, time and station number on the display while idle. It will also provide called/calling
name/number display, feature status and an interactive menu to guide you through feature
access and User Program selections:
To activate the Display Menu:
1. Press [MENU] button,
2. Press the Navigation Up/Down buttons and press the OK Soft button to select,
OR
Dial the associated digit (Menu selections shown):
1 . PHONE SETTING
2 . NETWORK CONFIG
BACK OK EXIT
Phone Setting
Set Font Type
Select the font type (0 for new roman, 1 for gothic), and press the OK Soft button to select.
Set Contrast
Press the [VOL Up/Down] buttons or Use Navigation Up/Down buttons to adjust
the brightness, then press the OK Soft button to select.