User guide

Release 1.0 SUMMIT IP Station User Guide April 2014
Chapter 5
MISC FEATURES
Alarm/Door Bell
The system can monitor external Alarm or Door Bell contacts:
Alarm Monitor - should the external contact activate, a unique Alarm Ring signal and
LCD display may be received. To restart the monitor circuit, the external contacts must be
deactivated and the Alarm Ring signal terminated.
Door Bell - a unique Door Bell Ring (single tone burst) may be received each time the external
contact is activated. A system contact also can be assigned to act as a Door Open contact.
To terminate the Alarm signal:
Dial 565 (Alarm Stop code).
To activate the Door Open contacts:
1. Lift the handset,
2. Dial Door Open code, #* and contact number 1-2.
Broker Call
Broker Call allows an SLT user to engage in two (2) calls, alternating between the two
parties, so that the conversation with each party is private.
There are two types of Broker Call, Transfer Broker call – the second call is originated by
the SLT
Camped On Broker Call – the second call camped on the SLT.
SLT
To activate a Transfer Broker Call
1. Make or receive an intercom or external call.
2. Momentarily press the hook-switch, intercom dial tone received and active call is
placed in Exclusive hold state.
3. Place second call.
3. To alternate between calls momentarily press the hook-switch.