User guide

Release 1.0 SUMMIT IP Station User Guide April 2014
Using Directory
2-5
Chapter 2: BASIC CALL HANDLING
Using Directory
Using Last Number Redial (LNR)
The last number dialed on an external call is automatically saved in the Last Number Redial
(LNR) buffer. On the SUMMIT IP Display Phone, the system will store the numbers dialed
on the last 100 calls.
To dial the Last Number for an external call:
1. Lift the handset,
2. Press Speed Soft button,
3. Dial *,
OR
Press the Redial Soft Button
OR
Press the Call Log Flex Button,
4. Press the Navigation up and down buttons to select from the last 15 numbers dialed
or received,
5. Press the OK Soft button or HOLD/SAVE.
Using and Entering Saved Number Dial
The last dialed number on an outside call may be stored (up to 23 digits) in a buffer for future
redial. This number is saved in memory until you request a new number be stored. Numbers
dialed for subsequent calls do not affect the Save Number buffer.
Operation
iPECS IP & LDP Phones
To save a dialed number, after dialing the number on an outside call
1. After dialing and before hanging up, press the [HOLD/SAVE] button.
To save a dialed number using the LIP-8000/8000E series menu
1. After dialing and before hanging up, press the [RIGHT NAVIGATION] button.
2. Locate and press the [HOLD/SAVE] soft button.
To dial a saved number
1. Lift the handset or press the [SPEAKER] button.
2. Press the [SPEED] button.
3. Dial “#”.
To dial a saved number using the LIP-8000/8000E series menu
1. Press the [DIR] soft button.
2. Press the [SPEED] soft button.
3. Dial “#”.