User guide

2-32 Using Phone Features and Functions
Chapter 2: Using the 24-Button Digital Phone
SBX IP 320 Phone User Guide
If you only want the alarm to go off for a single time:
7. Press #, otherwise, go to step 8.
IMPORTANT: If you do not press #, the alarm will go off at the same time
each day as you have set.
Once you have completed the time alarm time setting:
8. Press the OK soft button to
save the setting.
- Once the alarm has been
set, an asterisk (*) will flash
next to your system’s
current time on the display.
- When the alarm goes off,
the tone will sound and the
Alarm message will appear
on your display:
To Cancel an Alarm
Repeat steps 1 through 4 for setting the alarm.
But... instead of setting a time:
5. Press the ERASE soft button.
6. Press the OK soft button to complete the cancellation.