Technical data

Call Handling 1-83
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
To register the name of an SLT:
1. Lift the handset, then enter 563.
A confirmation tone sounds.
2. Enter 74.
3. Enter the name (up to 12 characters - using the Character Entry Chart on page D-50)
4. Perform a hook-flash to save the name.
Station Port Blocking
A station port can be blocked from receiving or making calls.
CONDITIONS
• Attendant and/or ADMIN PROGRAMMING stations cannot be blocked with this feature.
• A port blocked station cannot be set as part of a linked pair.
• If Station A (110) and B (111) are a linked pair, and these stations are set to port block, the
two stations are simultaneously blocked. However, if the linked pair relationship is
canceled, these two stations remain blocked.
ADMIN PROGRAMMING
Set Station Port Block
Station User Programming
The system supports multiple hierarchical menus based on station programming. Users and
Attendants can program stations by selecting the appropriate menus, sub-menus, and
programming options. (See Station User Programming Table on page D-48.).
CONDITIONS
• After the programming of a feature or function is completed, the previous menu list
appears.
• Pressing a flex button while the User Programming Main Menu is displayed, will activate
the Flex Button Programming Mode.
Station Port Block -- if value is set to ON, the station is
blocked and is out of service
PGM 113 + FLEX 15 + Value
(0 Off) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
Release 3.5
June 2010