Technical data

Call Handling 1-75
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
To activate (deactivate) a mobile extension:
1. Press [TRANS/PGM], then 34.
2. Press 1 (activate) or 0 (deactivate).
3. Press [HOLD/SAVE] to store the setting.
To register the mobile extension CLI number on a digital phone:
1. Press [TRANS/PGM], then 35.
2. Enter the mobile CLI number.
3. Press [HOLD/SAVE] to complete the registration.
To assign a Mobile Extension Activation flex button:
1. Press [TRANS/PGM], then the flex button to be assigned.
2. Press [TRANS/PGM], enter 34.
3. Press [HOLD/SAVE] to store the setting.
To use the mobile extension as a Hunt group member:
1. Press [TRANS/PGM], then 36.
2. Press 1 (activate) or 0 (deactivate).
3. Press [HOLD/SAVE] to store the setting.
To transfer a call from a mobile extension:
NOTE: Mobile Extension can transfer a call to another station or the target station’s
associated mobile extension.
1. While on a call on a mobile extension, press *.
The mobile extension user hears the internal dial tone, while the party being transferred
hears music on hold (if available).
2. Dial the target station number, then disconnect the mobile extension from the call.
The mobile extension user can make this a blind or supervised transfer; the call will be
transferred once the mobile phone disconnects from the call.
Hint: If a supervised transfer is attempted, but the target extension does not answer, the
mobile extension user can press # to reconnect to the transferred party
To make outgoing calls from the mobile extension:
1. From the mobile extension, dial the system’s DID number.
The internal dial tone sounds.
2. Proceed to make the call (internal or external) using CLI number of associated station.
Release 3.5
June 2010