Technical data

Call Handling 1-58
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
OPERATION / SETUP
Refer to the ADMIN PROGRAMMING
To assign a flex button at a user station:
1. Press [TRANS/PGM], then press the Flex button to be assigned.
2. Press [TRANS/PGM], then enter the Feature Code.
3. Press [HOLD/SAVE] to store changes.
To assign a CO or DSS button (direct) button:
1. Press [TRANS/PGM], then press the Flex button to be assigned.
2. Enter the appropriate Code.
3. Press [HOLD/SAVE] to store the setting.
To assign a Telephone Number (7208D/7224D digital phone only):
1. Press [TRANS/PGM], then press the Flex button to be assigned.
2. Press the [TEL NUM] soft button.
3. Enter the appropriate telephone number.
4. Press [HOLD/SAVE] to store the setting.
Forced Hands-Free Mode
A caller using a digital phone can temporarily change the answering mode of the called party
digital phone (that is from tone mode to hands free mode).
CONDITIONS
• If the digital phone is changed to Hands-Free mode, the connection tone will be provided,
and the voice path is connected.
• The answer mode of a called station cannot be changed if:
- the called station’s digital phone is set to a linked-pair station.
- the called station’s phone is set as a Mobile-Ext.
• If the calling station’s digital phone is set as a linked-pair station, the calling station’s digital
phone CAN use the forced hands free mode.
• Only the calling station’s digital phone must have Forced Hands-Free Mode enabled in
order to use this feature.
• After connection, any Hands-Free mode related features are not available (ex. CallBack).
Release 3.5
June 2010