Technical data

Call Handling 1-42
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
1. Press [TRANS/PGM] and the flex button to be assigned.
2. Press [TRANS/PGM], then *9.
3. Press [HOLD/SAVE] to save the setting.
To activate the Chime Bell:
Press the Chime Bell button at the Chime Bell Activate station.
CLI Display - SLT Feature
The SBX IP System supports the following CLI protocol specifications:
• Bellcore GR-30-CORE & SR-TSV-002476 & ETSI ETS 300 659, ETSI ETS 300 778
• Denmark, TDK-TS 900 216
• Sweden, Telecom specification 8211-A112, Standard SS 63 63 25
• India DTMF, TEC Standard No. S/ASF-01/02
• Brazil DTMF, 220-250-713 (STANDARD) Issue 01, November 1993
CONDITIONS
• For a CLI display on a single line telephone (SLT), a Ring Phase more than 4 seconds is
recommended.
• If the ring phase is less than 4 seconds, some of the SLTs will not receive CLI display
signal.
ADMIN PROGRAMMING
Set CO CID ATTR (Attribute)
CID Mode Select -- the User can select the CID
type.
PGM 147 + FLEX 1 + 0
(Value) + [HOLD/SAVE]
VALUES --
0 = Disable
1 = FSK mode
2 = DTMF CID
3 = Russia CID
4 = Russia CID (Auto)
CID Name Display -- the Analog CO Line CLI
carries the caller's telephone number and name.
PGM 147 + FLEX 2 + 0
(Value) + [HOLD/SAVE]
VALUES --
0 = Telephone No.
1 = Name & Tel No.
Release 3.5
June 2010