Technical data

Call Handling 1-37
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
Call Log (Models 7208D/7224D only)
The Call Log feature enables the station user to view a log of the last (15 to 50) incoming,
outgoing, and lost calls. The user can scroll through the list of numbers stored, select the
appropriate number, and activate a redial to that number.
The log includes the dialed number (CLI), the time, the date, and Station/System Speed name
of the call (if applicable). It is stored on the MBU, so it is retained even if the station is unplugged
or replaced.
IMPORTANT: This feature is only available if a flex button has been programmed.
CONDITIONS
• To use this feature, a flex button must be programmed for the call log.
• A user can program the Call Log List number (in the range of 15 to 50 - per station).
• When the Call Log List number is programmed, the All Call Log database will be
initialized.
• The maximum Call Log List items allowed per system is 500.
• The system assigns the Call Log list in order from the first available port.
• CLI MSG-Wait must be enabled in order to use the Lost Call Log.
ADMIN PROGRAMMING
Set Call Log List Number
Enable CLI Message Wait
Use PGM 114, then FLEX 4 … see page 1-136.
OPERATION / SETUP
To program a Call Log flex button:
1. Press [TRANS/PGM], then press the flex button to be assigned for the Call Log
feature.
2. Enter the Call Log code, then press [TRANS/PGM].
3. Press 57.
4. Press [HOLD/SAVE] to store the setting.
Call Log List Number -- sets the number of Call Log
Lists per Station.
PGM 160 + FLEX 19 + Value
(10, 2 digits) + [HOLD/SAVE]
VALUES --
Range = 10-50
Release 3.5
June 2010