Technical data

Remote IP Phone Setup E-58
Appendix E: Quick Start Topics
SBX IP 320 Programming & Operations Guide
5. Press the Volume + until ROUTER IP ADDRESS(DOT:*) appears. This is the Default
Gateway IP Address Field. If IP Addressing is being dynamically assigned you won’t
need to program this field. If IP Addressing is statically assigned enter the IP Address
of the Default Gateway and press Hold/Save.
ROUTER IP ADDRESS(DOT:*)
xxx.xxx.xxx.xxx (Default Gateway IP Address)
6. Press the Volume + until PHONE NET MASK(DOT:*) appears. This is the Subnet
Mask associated with the IP Address of the phone. If IP Addressing is being
dynamically assigned you won’t need to program this field. If IP Addressing is
statically assigned enter the IP Address of the Default Gateway and press Hold/Save.
PHONE NET MASK(DOT:*)
xxx.xxx.xxx.xxx (Subnet Mask)
7. Press the Volume + until PHONE IP ADDRESS(DOT:*) appears. This is the station IP
Address Field. If IP Addressing is being dynamically assigned you won’t need to
program this field. If IP Addressing is statically assigned enter the IP Address of the
Station and press Hold/Save.
PHONE IP ASSIGNED(DOT:*)
xxx.xxx.xxx.xxx (Station IP Address)
When these fields have been completed, press the Speaker button to reboot the IP Phone. The
phone will contact the VOIP card and register to the system. It will receive its station number
assignment from the KSU.
In this example, the IP address and station number information appears after two IP phones
have registered to the system:
Test the IP phone by dialing an extension number.
Release 3.5
June 2010