Technical data

Remote IP Phone Setup E-51
Appendix E: Quick Start Topics
SBX IP 320 Programming & Operations Guide
You will need a 24-button SBX digital telephone to set up the system.
For a typical test-bench or demonstration setup, you need four connections to a LAN switch,
each via a straight-through CAT5E patch cord as shown above.
TEST BENCH SETUP
You may use the following IP addressing information to set up a closed demo of the IP phone.
NOTE: These addresses will not function in a wide-area network or the Internet, they are for testing and
demonstration purposes only:
VOIP card KSU LAN port IP Phone Your PC
IP Address 192.168.1.4 192.168.1.3 192.168.1.5 192.168.1.2
Subnet Mask 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0
Default Gateway 192.168.1.1 192.168.1.1 192.168.1.1 192.168.1.1
Release 3.5
June 2010