Technical data

Networking Two SBX IP Systems E-44
Appendix E: Quick Start Topics
SBX IP 320 Programming & Operations Guide
12. Program the Flexible DID Table for Station Ringing:
(This will control the ringing destination of calls transferred across the Net via the Auto
Attendant.)
Program the Route that matches the last 3 digits of the Station Number. (i.e. Stations
2100 - 2147, select Routes 100 - 147), then select the Type > Destination … Update.
NOTE: You may ring DID and Analog CO incoming calls directly across the Network.
You cannot ring both sides of the Net at the same time.
Release 3.5
June 2010