Technical data

2.0 (cont) 07-08 A new CCR dial digit has been added to PGM 228 to indicate a Mailbox
Owner button.
Also, 3 new destinations have been added: Busy, No Answer, and Time
Out/Error.
1-124 &
1-123
PGM 141 - FLEX 11 has been added to enable/disable the marking of a
CO line(s) for 911 use.
1-5
Daylight Saving Time feature has been added (PGM 178 -FLEX 3-5). 1-234
DND Forward feature has been added (PGM 113 - FLEX 19). 1-50
911 feature is added. 1-5
The Weekly Time Table (PGM 233) has been modified to add Lunch
Start and End Times.
1-14
Pre-selected Message DND feature was added (PGM 113 - FLEX 16) . 1-51
DID Call Routing and Incoming CLI feature has been added (PGM 237). 1-129
DID/DISA DND/Pre-selected Message Destination feature has been
added to PGM 167.
- This feature replaces
PGM 167 -FLEX 4 features of Busy Prompt
Usage, Error Prompt Usage, DND Prompt Usage, No Answer Prompt
Usage, and Attendant Transfer Prompt Usage and moves them to
PGM 167 - FLEX 5.
- This move displaces Reroute Busy Destination, Reroute Error
Destination, and Reroute No Answer Destination from FLEX 5-7 to
FLEX 6-8.
1-122
PGM 143 - FLEX 14-18 have been added:
- Screening
1-223
- Double CLI Service/Calling Party Number Service 1-145
- Deny Incoming Call 1-224
- ICLID Usage 1-130
Transit-Out Security feature is added. A-19
PGM 324 - FLEX 9-11 have been added: Net Firewall Routing,
Authorization Code COS Use, and SMDR Dial Hidden.
A-25
1.0 01-08 Initial Release
NOTES --1) Manual contains information on ISDN, DCOB,
and SMS features that are not currently supported.
2) Information about DID pertains only to SIP Trunking.
--
REVISION HISTORY
Release Date Documentation Changes Page No.
Release 3.5
June 2010