Technical data

Setting Up Voice Mail E-6
Appendix E: Quick Start Topics
SBX IP 320 Programming & Operations Guide
8. Click STA ATTR III.
9. Make sure the VMB1 Access option is enabled (a check mark in the check box).
The default setting is enabled (ON); however, if it isn’t enabled, click on it to enable it.
10. Ensure the Auto FWD VMIB option is enabled (a check mark in the check box).
The default setting is disabled (OFF); if it isn’t enabled, click on it to enable it.
11. Click Update to store the changes.
General Information about Voice Mail
• When a voice mail message is waiting, the Message Waiting Indication continues and the
Callback Button light continues to flash.
• The Message Waiting Indication can be extinguished by saving or deleting any messages
in the VMIB.
• To Save a Message, press Next during the message (24-button phone) and Hold
(8-button phone).
• You can access a VMB remotely (either outside or inside) from the greeting of any VMB by
pressing the * key and entering the password for that VMB. From outside the system, you
must dial a Station that is forwarded to a VMB. Internally you may dial a Station that is
forwarded to a VMB or press the Callback Button on any Station showing a MWI.
NOTE: To access VM via the Callback Button, there must currently be messages waiting.
• To access voice mail from an SLT, go off hook and dial 557.
NOTE: The 557 code only works on SLTs.
Release 3.5
June 2010