Technical data

Call Control 1-23
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
• When the Automatic Release time is set to 0, the feature is not activated.
• If a call is dialed without lifting the handset, and the Auto Release timer expires, the call
will be canceled. In addition, the station will automatically return to an idle state.
• If a call is dialed using the handset, and the Auto Release timer expires, the call will be
canceled. An error tone will sound.
ADMIN PROGRAMMING
Set Automatic CO Release Timer
Set Station Auto Release Timer
Class Of Service (COS)
Each station and CO line may be assigned different classes to either allow or restrict call
service. The level of COS assignments are programmed at each station and each CO line.
CONDITIONS
COS Rules
• In STA COS 7, no dialing is allowed on CO lines.
• In CO COS 5, STA COS 1-6 is ignored, and there is no restriction on access to CO lines.
• CO COS 4, STA COS 1-6 are ignored, and long distance calls are not allowed; max. 8
digits may be dialed.
• CO COS 1 is restricted by the STA COS.
• CO COS 2 and STA COS 2/4 are restricted by Exception Table A.
• There is no restriction in STA COS 1/3.
• In STA COS 5, long distance calls are not allowed; max. 8 digits can be dialed.
Automatic CO Release Timer -- Uncompleted CO line
calls will automatically be released when the timer
expires.
PGM 180 + FLEX 14
+ 030 (seconds, 3
digits) + [HOLD/SAVE]
VALUES --
Range = 020-300
Station Auto Release Timer -- If a station user hears a
ring back tone and no action is taken within the
designated time, the station will be released.
PGM 182 + FLEX 5 +
060 Value (1 sec, 3
digits) + [HOLD/SAVE]
VALUES --
Range = 020-300
Release 3.5
June 2010