Technical data

Admin Programming Codes D-17
Appendix D: Quick Reference - Programming Tables
SBX IP Programming & Operations Guide
- 14 ACD Print Timer Unit 1-228 Hour/Sec Sec
- 15 Set VM SMDI Type 1-228 Type II / Type I Type I
- 16 Incoming Toll Check 1-29 On/Off Off
- 17 Auto FAX Transfer CO 1-33 01-36 -
- 18 No DSS Indication 1-228 Enable/Disable Disable
- 19 UK Billing Mode n/a - -
- 20 COS 7 When Auth Fail 1-228 On/Off Off
- 21 5 Digit Authorization Code 1-21 On/Off Off
- 22 LCR Dial Tone Detect 1-228 On/Off Off
- 23 Transit-Out Security A-19 On/Off Off
162 - Admin Password 1-3 4 digits (*, #, 0-9) not assgned
163 - (System) Alarm Attributes - --
- 1 Alarm Enable 1-31 On/Off Off
- 2 Alarm Contact Type 1-31 Close / Open Close
- 3 Alarm Mode 1-31 Alarm / Bell Alarm
- 4 Alarm Signal Mode 1-32 RPT / Once RPT
164 - Attendant Assignment Sta No. 1: 100
- 1 System Attendant Assignment 1-6 F1 Default = Sta 100
- 2 Main Attendants Assignment 1-6 F2-F5 not assgned
165 - Auto Attendant - --
- 1 Auto Attendant Usage C-20 On/Off Off
- 2 Auto Attendant VMIB Annc.# C-20 00-70 00 (not assgned)
166 - CO-to-CO Class of Service - 01-11 07
- 1 Day COS 1-27 01-11 07
- 2 Night/Weekend COS 1-27 01-11 07
167 - DID/DISA Destination - F1-F8 -
- 1 Busy Destination 1-126 F1:Tone F2:Atd F3:Hunt F1
- 2 Error Destination 1-126 F1:Tone F2:Atd F3:Hunt F1
- 3 No Answer Destination 1-126 F1:Tone F2:Atd F3:Hunt F1
- 4 DND Destination 1-126 F1:Tone F2:Atd F3:Hunt --
- 5 VMIB Prompt Usage 1-122 F1-F5 F1
PGM
Code
Flex
Btn
Feature
Page
No.
Range
Default
Value
SYSTEM
Release 3.5
June 2010