Technical data

Virtual Mailboxes C-27
Appendix C: Voicemail Service
SBX IP Programming & Operations Guide
VMIB MSG Password
VMIB MSG time
Set VMIB MSG type
Outbound Notification
Outbound Notification CO Group
Outbound Notification Tel. number
VMIB MSG Password --
if value is set to ON, the virtual
mailbox owner must enter a password to retrieve voice mail
messages.
PGM 129 + FLEX 6 + 1
(On) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
VMIB MSG Time -- if if value is set to ON, the time will be heard
when voice mail messages are retrieved.
PGM 129 + FLEX 7 + 1
(On) + [HOLD/SAVE]
VALUES --
0 = Off
1 = On
VMIB MSG Type -- FIFO/LIFO plays the first recorded
VMIB message, or the latest message, respectively
PGM 129 + FLEX 8 + 1
(FIFO) + [HOLD/SAVE]
VALUES --
0 = LIFO
1 = FIFO
Outbound Notification -- if value is set to ON, the mailbox
will perform outcall notification when a message is received.
PGM 129 (VMON) +
FLEX 9 + 1 (Enable) +
[HOLD/SAVE]
VALUES --
0 = Disable
1 = Enable
Outbound Notification CO Group -- determines what CO
group will be used when placing an outcall notification.
Default is group 1.
PGM 129 (VMON) +
FLEX 10 + Value +
[HOLD/SAVE]
VALUES --
1-24
Outbound Notification Tel. Number -- this is the
telephone number that will be called when the mailbox
receives a message.
PGM 129 (VMON) +
FLEX 11 + Value +
[HOLD/SAVE]
VALUES --
up to 24 digits
Release 3.5
June 2010