Technical data

Call Control 1-19
Chapter 1: Basic System Features
SBX IP Programming & Operations Guide
CONDITIONS
• Each station can be assigned its own account code.
• While entering the account code, the current call is put on hold.
• The user may enter the account code before or after a call conversation is established.
ADMIN PROGRAMMING
Set the SMDR Account Enter Code
Use PGM 106, then Flex 7. For more details, refer to the SBX IP Installation Manual.
OPERATION / SETUP
To assign an ACCOUNT CODE flex button:
1. Press [TRANS/PGM].
2. Press the Flex button you want to assign as an ACCOUNT CODE button.
3. Press [TRANS/PGM], then press 80.
4. Press [HOLD/SAVE] to store the setting.
To enter an account code before accessing a CO line:
1. Press the programmed ACCOUNT CODE flex button.
2. Enter the account code (max of 12 digits), or press * button.
3. Intercom dial tone should be heard and a CO line is secured to make a call.
To enter an account code during a conversation:
1. While on a CO line call, press the ACCOUNT CODE flex button.
The other party will be put on hold.
2. Enter the account code (max of 12 digits).
3. Press the ACCOUNT CODE flex button.
You will be reconnected to the other party.
To enter an account code during a conversation (
w/o using the ACCOUNT CODE flex button):
1. While on a CO line call, press [TRANS/PGM], then 550.
The other party will be put on hold.
2. Enter the account code (maximum 12 digits), or press * button.
You will be reconnected to the other party.
Release 3.5
June 2010