Technical data

Outcall Notification C-22
Appendix C: Voicemail Service
SBX IP Programming & Operations Guide
Outcall Notification
A prompt will play when the system contacts the outcall party: "This is the SBX IP system, there
is a message for [mailbox xxx]". If the system cannot reach the notification party after the
specified number of attempts, the system will consider the notification failed.
CONDITIONS
• The Outcall Notification parameters set up by the station user (enable feature, notify
attempts, and retry intervals) will override those entered by the System Administrator.
ADMIN PROGRAMMING
Outbound Notification
Outbound Notification CO Group
Outbound Notification Tel. number
Outbound Notification Retry
Outbound Notification --
if value is set to ON, the mailbox
will perform outcall notification when a message is received.
PGM 127 (VMON) +
FLEX 9 + 1 (Enable) +
[HOLD/SAVE]
VALUES --
0 = Disable
1 = Enable
Outbound Notification CO Group -- determines what CO
group will be used when placing an outcall notification.
Default is group 1.
PGM 127 (VMON) +
FLEX 10 + Value +
[HOLD/SAVE]
VALUES --
1-24
Outbound Notification Tel. Number -- this is the
telephone number that will be called when the mailbox
receives a message.
PGM 127 (VMON) +
FLEX 11 + Value +
[HOLD/SAVE]
VALUES --
up to 24 digits
Outbound Notification Retry -- determines how many
times the system will retry the notification in the event of
a failure.
PGM 127 (VMON) +
FLEX 12 + Value +
[HOLD/SAVE]
VALUES --
1-9
Release 3.5
June 2010