Technical data

Calls to Voicemail C-10
Appendix C: Voicemail Service
SBX IP Programming & Operations Guide
To append an existing VMIB message (7224D only):
1. While listening to a message, press the [ADD] soft button.
2. Record the appended message.
3. Press [HOLD/SAVE] to save the recording.
To rewind the current message:
Press the [REWIND] soft button to rewind the current message as per the setting of the
Rewind Message Timer - see ADMIN PROGRAMMING.
Calls to Voicemail
DID Call to a Station Voice Mailbox
DID capability can be programmed for station voice mailboxes within the SBX IP 320 system.
CONDITIONS
• Once the destination of the Flexible Conversion DID table is programmed for a station 's
VMIB, DID Calls are routed to the station's VMIB allowing the caller to leave a message.
• A maximum of 1000 Flexible DID Table entries can be programmed.
• Each Flexible DID Table entry has five attributes
- DID Name
- Day Destination
- Night Destination
- Weekend Destination
- Reroute Destination
• If the Day/Night/Weekend DID destination is busy, calls are rerouted to the designated
Reroute Destination designated in the DID Destination Table - see ADMIN
PROGRAMMING.
• The VMIB Access option must be enabled - see ADMIN PROGRAMMING.
ADMIN PROGRAMMING
Enable VMIB Access
Set Flexible Conversion DID Destination
Use PGM 231 … see page 1-127.
VMIB Access -- if value is set to ON, the station user can use
the voice mail.
PGM 113 + FLEX 2 + 1
(Enable) + [HOLD/SAVE]
VALUES --
0 = Disable
1 = Enable
Release 3.5
June 2010