Technical data

Announce Only Mailbox C-4
Appendix C: Voicemail Service
SBX IP Programming & Operations Guide
Announce Only Mailbox
This feature provides a method to mark a mailbox as an "announce" type. When a caller enters
the mailbox, a customized greeting plays and then returns the caller to the previous menu or
teminates the call, whichever is programmed.
CONDITIONS
• The Announcement Only option must be set in Admin Programming.
• There is no limit to the number of mailboxes that can be marked as "announcement only".
• An Announce Only mailbox does not accept voice messages.
ADMIN PROGRAMMING
Enable VMIB Access
Use PGM 113, then FLEX 2 … see page C-10
Enable Announce Only Mailbox
Set Announce Only Action
Announce Only Mailbox -- if value is set to ON, the
station user can designate which mailboxes will be
Annouce Only.
PGM 127 + FLEX 3 + 1
(Enable) + [HOLD/SAVE]
VALUES --
0 = Disable
1 = Enable
Announce Only Action -- this value allows the station
user to designate the action a caller will receive when
entering their Announce Only mailbox.
PGM 127 + FLEX 4 + 1
(Value) + [HOLD/SAVE]
VALUES --
0 = Hang-up
1 = Previous Menu
Release 3.5
June 2010